Where to Use:
It is mainly used for the non-dusty and non-bacteria areas like pharmaceutical factory, hospital, precision machinery, electronic factory, etc.
Advantages
1. Seamless, dust-proof and easy to clean
2. Solvent-free and environmental
3. Dense corrosion-resistance surface
4. Bright &smooth surface
Technical Data:
Drying time: | Touch dry: 2 hours/ Hard dry: 2 day |
Compressive strength (Mpa) | ≥85 |
Impact resistance strength (Kg•cm) | 65 |
Flexural strength (Mpa) | 40 |
Adhesive force grade | 1 |
Pencil hardness (H) | 3 |
Abrasion resistance(750g/1000r, zero gravity, g) | ≤0.03 |
Resistance to engine oil, diesel oil for 60 days | no change |
Resistance to 20% sulfuric acid for 20 days | no change |
Resistance to 20% Sodium hydroxide for 30 days | no change |
Resistance to toluene, ethanol for 60 days | no change |
Service life | 8-10 years |
Measuring
With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cup to make sure you are mixing it well. Hardener a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later
Features
1.Can cure at room temperature or heating curing,
2.Can automatic antifoaming
3.Can automatic leveling
4.Cured without ripples, no bubbles
5.Good transparency and excellent surface gloss
6.Can polish after drying
7.After dry,it is with high hardness as stones
8.With high gloss like mirror
Caution
1.The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2.Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4.Keep away from children.
5. Please take a trial before application to avoid usage mistake.
Clean up
Clean tools and equipments first with paper towels, then clean them with solvent before the resin hardens. Health and safety information It contains certain chemicals which can cause skin irritation. Wear gloves, masks while handling the product, washing thoroughly after handling. Should skin contact occur, wash immediately with soap and water. During application and curing in closed rooms, adequate fresh air ventilation must be provided. Keep away from open flames including welding. In case of accidental eye contact, wash with a large quantity of water and immediately seek medical advice. For detailed health, safety, environment recommendations, please consult and follow the instruction on the product material safety data sheet
Why choose us?
1)Technicians can be sent to your site for your coating problems whenever you need.
3)Good quality products at a competitive price.
4)Quick delivery time for new products development.
5)Free samples could be provided.
