Water Resistant Epoxy Floor Paint For Workshop

  • Water Resistant Epoxy Floor Paint For Workshop Manufacturers, Water Resistant Epoxy Floor Paint For Workshop Factory, Supply Water Resistant Epoxy Floor Paint For Workshop
  • Water Resistant Epoxy Floor Paint For Workshop Manufacturers, Water Resistant Epoxy Floor Paint For Workshop Factory, Supply Water Resistant Epoxy Floor Paint For Workshop
  • Water Resistant Epoxy Floor Paint For Workshop Manufacturers, Water Resistant Epoxy Floor Paint For Workshop Factory, Supply Water Resistant Epoxy Floor Paint For Workshop
  • Water Resistant Epoxy Floor Paint For Workshop Manufacturers, Water Resistant Epoxy Floor Paint For Workshop Factory, Supply Water Resistant Epoxy Floor Paint For Workshop
  • video
Water Resistant Epoxy Floor Paint For Workshop
  • HUAREN
  • China
  • 7 days
  • 20,000MT

Water Resistant Epoxy Floor Paint For Workshop advantage:
that is a two-component solvent-free polyester epoxy paint. Nice appreance,dust-resistance and easy to clean. The flooring system can bond well with the solid base.Meanwhite its compressive strength and impact resistance ability is excellent.It can be applied in the non-dusty and non-bacteria areas like pharmacy factory,hospital,precision machinery,electronic factory etc.

Advantages:

1. Nice appearance and dustproof.

2. Strong bonding with the base, low shrinkage, durable and wear-resistant.

3. Corrosion-resistant to the general chemicals.

4. Good anti-slip performance.

5. Bear moderate load.

 

Application instructions:

Surface preparation

Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles,oil,grease,and other contaminants.

Primer

Prepare a barrel, pour paint and hardener Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m².The main purpose of this primer is to seal the substrate completely and avoid air-bubbles in the body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours.

Inspection standard for the primer: even film with certain brightness.

Undercoat

Mix paint and hardener then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure.

Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface

Top coat

Mix paint and hardener and then apply the mixture with spatula. The consumption quantity is 1.0kg/sqm.

Maintenance

5-7 days. Don’t put the floor into use or wash it with water or other chemicals.

 

FAQ

1. Do you provide OEM service ?

A:Yes , OEM service is available.

2. Can you offer the free samples to test ?

A:Yes ,Free samples ( less than 10kg ) without the freight fee is available.

3. What is the payment term ?

A:Commonly is 30% deposit and balance before shippment by T/T. 100% L/C is also acceptable.

4. How about the goods delivery time?

A:Commonly is 15 days for a 20ft container.

5. What is our minimum quantity order?

A:Commonly is 1.000 kilogram .And it could be negotiated for the first order.

 


OEM Order
OEM Order
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right