News

Antifouling paint is the most common type of paint on the bottom of ocean-going ships. Its main function is to prevent the attachment of marine organisms. Antifouling paint inhibits the growth of attached organisms by slowly releasing biocides (such as copper compounds or other organic active ingredients).

First, use coarse-grain sandpaper (P40-P80) for rough sanding to completely remove rust or old paint film. Then, use medium-grain sandpaper (P120-P180) for secondary sanding to reduce the deep marks left by the coarse sandpaper and provide a good adhesion surface for anti corrosive epoxy primer.

Epoxy floor paint is a high-performance floor coating that is mainly used to provide a strong, wear-resistant and beautiful surface for concrete or other floors. Epoxy primer is a base coating used in a coating system. Its main function is to improve the adhesion of subsequent coatings (such as topcoats).

The types of primers commonly used for rusty metals are: 1. Zinc-rich primer 2. Epoxy primer 3. Zinc phosphate primer 4. Polyurethane primer 5. Red lead primer

Common types of anti-rust paints are 1. Zinc-rich primer 2. Epoxy primer 3. Iron oxide red primer 4. Polyurethane paint In the selection of anti-rust paints, there are many types available on the market, and each paint has its specific anti-rust mechanism and applicable scenarios.

That self etching primer and epoxy primer have their own emphasis on functions and performance, so they cannot simply replace each other. Self etching primer is more suitable for scenes with improved adhesion, while epoxy primer performs well in environments that require durable protection.

Zinc rich primer is a high-performance anti-corrosion coating, mainly composed of a large amount of zinc powder and film-forming substances (such as epoxy resin, alkyd resin, etc.). Zinc rich primer is coated on the metal surface to form a protective film rich in zinc powder, thereby providing long-term anti-corrosion protection.

If both anti-corrosion and wear resistance are required, polyurethane primer and epoxy primer can be used together: first apply epoxy primer as an anti-corrosion layer, and then apply polyurethane primer or topcoat to improve wear resistance and anti-aging performance.

The formula design of the epoxy primer determines its original viscosity. If the product has a high viscosity when it leaves the factory, direct use may cause difficulty in brushing or spraying. At this time, adding an appropriate amount of diluent can reduce the viscosity and improve construction performance.

Epoxy primer is an important part of the anti-corrosion coating system for aluminum products, especially suitable for use in severely corrosive environments. It has excellent adhesion and chemical resistance, and can form a hard protective film on the surface of aluminum to block the intrusion of moisture, oxygen and other corrosive substances.

Epoxy primer is the most common and widely used primer, especially for aluminum hulls. Epoxy primer has excellent corrosion resistance and adhesion, and can form a solid barrier on the aluminum surface to prevent the penetration of moisture and oxygen and prevent corrosion of the hull.

Based on the above classification, we can clearly say that epoxy primer is indeed a type of anticorrosive paint. Epoxy primer not only has the adhesion enhancement effect of general primers, but more importantly, it plays a vital protective role in the anticorrosion system.

Concrete is a porous material with high water absorption. This means that when the paint is directly applied to its surface, it is easily absorbed by the concrete, resulting in uneven distribution of the paint and affecting the overall effect.

In some application scenarios that require both anti-corrosion performance and adhesion, you can consider using the two primers in combination. For example, a metal etch primer can be applied first to improve adhesion and then an epoxy primer can be applied to provide long-term corrosion protection.

Although both epoxy primers and epoxy topcoats are based on epoxy resins, their chemical composition and formulations are different. The formulation of epoxy primers focuses more on enhancing adhesion and corrosion protection, so more active ingredients and preservatives are usually added.

In some industrial environments, chemicals such as acids, alkalis, and chemical solvents can corrode metals. If the primer does not have sufficient chemical corrosion resistance, the chemicals may penetrate through the coating to the metal surface, causing rust.

Zinc-rich primers are a type of coating rich in zinc powder that performs well in the field of corrosion protection due to its cathodic protection. Zinc powder forms an electrochemical reaction with steel in the coating, corroding before steel, thereby protecting the steel from corrosion.

Zinc-rich primer prevents steel corrosion through the anodic protection of zinc, which is an electrochemical protection. The epoxy primer forms a dense shielding layer to isolate moisture and oxygen and prevent the oxidation of the substrate, which is a physical shielding protection.

Anticorrosion primer is a coating used on metal surfaces. Its main function is to prevent metal oxidation and corrosion by forming a dense protective film to isolate air, moisture, salt and other corrosive substances from contact.

Polyurethane primers can maintain good construction performance at lower temperatures, so they are more convenient for construction in cold climates. Epoxy primers require higher temperatures to fully cure, which may require additional heating equipment in cold climates.

If the coating needs to be exposed to the outdoors or in direct sunlight for a long time, topcoat is essential. Topcoat usually uses a more weather-resistant coating, such as polyurethane paint or fluorocarbon paint, to protect the epoxy anticorrosion primer from UV rays factors.