At present, more economical and safe anti-corrosion coatings for desulfurization towers are constantly being developed. For example, silicone modified epoxy novolac urushiol coatings, high molecular ceramic polymer materials and so on.
When carrying out the anti-corrosion project of the desulfurization tower, the first thing to pay attention to is that before the anti-corrosion project of the desulfurization tower, the matrix of the building should be cleaned up. Due to the harsh working environment of the desulfurization flue, there will be a lot of pollutants and dust on the surface. . Clean up these contaminants so that the anti-corrosion mud of the desulfurization tower can better adhere to the surface, otherwise, the coating will be affected after a long time. Secondly, during the construction of the anti-corrosion project of the desulfurization tower, the primer should not be exposed to the air for a long time. At the same time, it is necessary to protect the surrounding area of the construction to prevent rain and windy weather from damaging the clay at the bottom layer. Wait for the primer to dry. Afterwards, before the topcoat is applied, the topcoat cannot be applied until the primer has dried completely. Finally, during the construction, pay more attention and follow the correct operation. This is very necessary for the quality of the project.