News

The high wear resistance of epoxy paint makes it an ideal choice for industrial and commercial floors. It can withstand high frequency of pedestrian and vehicle traffic, keeping the floor flat and beautiful.

Although there are many benefits to using primer, in some cases you can choose not to use primer and directly spray white traffic paint. For example: construction time is tight, the road condition is good, and you can choose not to use primer in these cases for short-term use.

In theory, it is feasible to spray 2K car paint on 1K car paint. 2K paint has strong adhesion and can cover 1K paint to form a strong paint film. Before spraying 2K paint, make sure that the 1K paint has been completely cured, otherwise it may cause the paint film to be unstable or fall off.

2K car paint is widely used in the field of car painting due to its excellent performance. Its service life is generally between 5 and 10 years, and the specific time depends on many factors. Environmental factors, usage habits and construction quality will affect the life of 2K car paint.

The main uses of white marking paint: 1. Road traffic markings: ● Lane dividers ● No parking lines and parking spaces ● Pedestrian crossing lines 2. Parking lot and warehouse markings: ● Parking lot markings ● Warehouse markings 3. Stadium landmarks: ● Stadium markings ● Playground markings 4. Industrial and commercial uses: ● Workshop and factory markings ● Airport markings 5. Other uses: ● Parking lot and garage markings ● Construction site markings.

Acrylic paints can maintain the stability and color brightness of the coating in both hot and cold weather. Epoxy floor coatings are relatively weak and may yellow and age after long-term exposure to sunlight, so they are more suitable for indoor or protected environments.

2K paint requires specific environmental conditions during the drying and curing process. If the temperature is too low or too high, and the humidity is too high or too low, it will affect the curing effect of the paint and may cause the paint film to crack.

After high temperature construction, hot melt marking paint cools quickly and cures quickly. During the cooling process, heat is dissipated to the outside, making the surface temperature of the marking paint high for a short time, generating a sense of heat.

The mixing ratio of 2K acrylic paint varies from manufacturer to manufacturer and specific product, but the common ratios are usually 4:1, 3:1 or 2:1, that is, the ratio of base to curing agent is 4:1, 3:1 or 2:1.

Zinc-rich primers are particularly suitable for steel protection in highly corrosive environments. For example, steel structure bridges, marine engineering facilities, petrochemical equipment, etc., these facilities are exposed to corrosive environments such as moisture, salt spray and chemicals for a long time.