Industry News

● Leisure yachts: Usually used in freshwater or coastal waters, antifouling paint can effectively keep the bottom of the ship clean and improve navigation efficiency. ● Commercial ships and fishing boats: Long-term sailing at sea, antifouling paint is a necessity, which can significantly reduce maintenance costs and fuel consumption. ● Sailing and rowing boats: The speed requirement is high. Antifouling paint can reduce the resistance of the bottom of the ship and increase the speed.

As the name suggests, quick drying paint is a paint that dries very quickly. In just a few minutes or even seconds after painting, it can quickly solidify into a film with a certain degree of hardness and durability.

In some industrial environments, chemicals such as acids, alkalis, and chemical solvents can corrode metals. If the primer does not have sufficient chemical corrosion resistance, the chemicals may penetrate through the coating to the metal surface, causing rust.

Acrylic floor coatings are a type of coating based on acrylic resins, mainly used for floors with light to medium loads. Compared to epoxy floor coatings, acrylic coatings are easier to apply and have a faster drying time. Acrylic floor coatings have good weather and UV resistance.

Zinc-rich primers are a type of coating rich in zinc powder that performs well in the field of corrosion protection due to its cathodic protection. Zinc powder forms an electrochemical reaction with steel in the coating, corroding before steel, thereby protecting the steel from corrosion.

Typical occasions for using industrial enamel paint: 1. Metal surface corrosion protection 2. High temperature or extreme climate environment 3. Chemical corrosion resistance requirements 4. Occasions requiring high gloss and aesthetics 5. High wear or heavy load environment

The number of layers of epoxy floor paint varies depending on the specific application scenario, ground conditions, and expected effects. Generally, the number of coats of epoxy floor paint is between 2 and 4. In the construction process of epoxy floor paint, the use of primer is crucial.

Zinc-rich primer prevents steel corrosion through the anodic protection of zinc, which is an electrochemical protection. The epoxy primer forms a dense shielding layer to isolate moisture and oxygen and prevent the oxidation of the substrate, which is a physical shielding protection.

Generally speaking, the complete hardening time of oil-based enamel paint is longer, usually 7-14 days, while the hardening time of water-based enamel paint and acrylic enamel paint is shorter, about 5-7 days.

Metal protective paint is a coating specially used to protect metal surfaces from external factors such as oxidation, corrosion, and wear. It forms a dense protective film on the metal surface to isolate air, moisture, and other corrosive media, thereby extending the service life of metal materials.