Industry News

For anti slip paint, full cure usually takes 24 to 48 hours, and in some cases, it may take longer (such as 72 hours or more), especially when the coating is thick or the environmental conditions are not favorable.

The types of primers commonly used for rusty metals are: 1. Zinc-rich primer 2. Epoxy primer 3. Zinc phosphate primer 4. Polyurethane primer 5. Red lead primer

Micaceous paint is a protective and decorative paint with mica powder as the main ingredient. It is named after the special mineral material mica (Mica) added to it. Mica is a layered silicate mineral with excellent heat resistance, corrosion resistance, UV resistance and unique gloss.

Commercial transport ships, especially large ships such as tankers, container ships, and bulk carriers, are often exposed to seawater during long-term voyages. Since these ships need to sail for a long time in a large area of ​​sea, the bottom of the ship is exposed to seawater for a very long time, so antifouling bottom paint is essential for them.

For bare metal surfaces without any treatment, the use of primer is almost necessary. Bare metal surfaces are usually smooth and hard, and direct application of industrial enamel paint may not achieve ideal adhesion. In particular, steel metals are very prone to rust without protection.

Polyurethane waterproof coating is a highly efficient waterproof material, which is highly respected in the market for its excellent elasticity and waterproof performance. This coating usually exists in liquid form, and when used, it is evenly applied to the wall or floor of the shower room by brushing or rolling.

The types of polyurethane waterproof coating are: 1. Single-component polyurethane waterproof paint 2. Two-component polyurethane waterproof paint 3. Oil-based polyurethane waterproof paint 4. Water-based polyurethane waterproof paint 5. Modified polyurethane waterproof paint

Acrylic paint is widely used for painting boat decks, especially for occasions that require fast drying and short construction cycles. Acrylic paint has a short drying time, can be quickly applied in hot or humid environments, and has good weather resistance and UV resistance.

Whether metallic water based paint can cover old paint depends on two main factors: the type of old paint (whether it is water-based paint or solvent-based paint) and the surface condition of the old paint. Generally speaking, metallic water based paint can cover old paint, but it must be ensured that the old paint layer is in good condition and has not fallen off, cracked or severely peeled off.

The energy industry includes thermal power plants, hydropower stations, nuclear power plants, etc. The equipment of these facilities is exposed to high temperature, high pressure or corrosive media all year round. Industrial paint can provide a protective barrier for these equipment to prevent corrosion, wear and thermal damage, and ensure the stable operation of the equipment.